IMPORTANT - BEFORE CREATING A ID REQUEST, Please Follow the H.A.M.M.Y Code Below....
H - Have at least two good sized clear photos, this is Mandatory
A - About your detecting day, type of land, depth found.
M - Measure items by doing the pics next to a scale or ruler. this is Mandatory
M - Machine used? settings? interesting to other users.
Y - You will always get a better ID if you supply more information.
*PLEASE NOTE: Use of a modern coin or written dimensions no longer qualify as a "scale". We need a properly-defined measure - metric or good old-fashioned inches will do.
- Posts: 1380
- Joined: Mon Jun 06, 2016 9:00 pm
- Location: Devon
- Has thanked: 635 times
- Been thanked: 674 times
It may be junk but it looks like it was made for a purpose, small hole at the top and you can see that it's broken at the other end, it looks like it has some age to it but who knows,?
The stubble down here is still very hard, difficult to get a decent swing so I have to meander around the areas where its been cut lower, still hopefully it will start to rot and get softer soon
As usual found with the Q40 in jewellery mode sens at 85, discrim at 40.
Thanks in advance
- Posts: 5176
- Joined: Sat Feb 18, 2017 8:19 am
- Location: Norfolk
- Has thanked: 1469 times
- Been thanked: 1776 times
Some sort of electrical gubbins(I'm told it's a Deus). In various colours
- Posts: 10745
- Joined: Sun Jul 10, 2016 6:54 pm
- Location: Oxfordshire
- Has thanked: 4346 times
- Been thanked: 4845 times
XP Deus I use the HOT programme on 17khz, reactivity at 2.5 on v5.21 with the X35 11” coil
Hammered silver 2019 - 20