Ordnance Forum Rules and Guidance :
By entering this forum you agree to accept the additional rules and guidance listed on the link below:
Ordnance Forum Rules
IMPORTANT Before Creating an ID Request, Please Follow the H.A.M.M.Y Code Below....
H - Have at least two good sized clear photos, this is Mandatory
A - About your detecting day, type of land, depth found.
M - Measure items by doing the pics next to a scale or ruler. this is Mandatory
M - Machine used? settings? interesting to other users.
Y - You will always get a better ID if you supply more information.
*PLEASE NOTE: Use of a modern coin or written dimensions no longer qualify as a "scale". We need a properly-defined measure - metric or good old-fashioned inches will do.
- Posts: 9760
- Joined: Sun Nov 27, 2011 8:21 pm
- Location: North Lincolnshire
- Has thanked: 1671 times
- Been thanked: 2428 times
These fuses come in a variety of sizes so it's important to include a scale/measurements within the body of the text. The requirement is that all finds submitted for ID should include this information.
Please note the content of the link below and add the measurements by way of edit to your text.
Thank You - The Admin Team.
Guide to Requesting an ID
- Posts: 615
- Joined: Fri Dec 19, 2014 12:43 pm
- Location: East Devon
- Has thanked: 35 times
- Been thanked: 197 times
+1 for a No.199 fuze.
The No.199 was used on the 3.7 inch AA gun, so you should find plenty more bits and pieces around there!
Not all AA batteries were the concrete sort, some like the 40mm and 3.7 inch could also be temporarily mounted placements. The gun could be mounted on a wheeled chassis and ‘unfolded’ once at the firing site, leaving no trace of it having been there on the ground (unlike a concrete foundation firing platform).