Before creating an ID request please note you must:
1. include at least 2 photos of the item, both sides of a coin, or two angles of other items.
2. Include a ruler or other form of scale that clearly displays the scale in cm or inches. A coin or written dimensions is not acceptable.
Further information will also help, full guidance is below:
H - Have at least two good sized clear photos.
A - About your detecting day, type of land, depth found.
M - Measure items by doing the pics next to a scale or ruler.
M - Machine used and settings are interesting to other users.
Y - You will always get a better ID if you supply more information.
- Posts: 591
- Joined: Wed Feb 07, 2018 10:48 am
- Location: Norfolk
- Has thanked: 485 times
- Been thanked: 289 times
I found this at the weekend on a little ploughed area that has so far only yeilded some Georgian coppers and the usual odds 'n sods such as lead scraps, buttons and shotties..
I appreciate that it may well prove to be nothing of interest, but I thought I'd see if anyone can shed any light... I thought initially that it was bent out of shape, but now I'm not so sure.
Found with the Racer 2 in two tone mode, factory settings and using the big RC40 coil. It was approx 5 inches deep. Soil dry but very easy digging.
Thanks for looking, and all the best.
This is the nearest I could come up with that it is the same principle of how it worked anyway Although the one found is obviously a lot older and more elongated.